Last Updated on June 1, 2022

Do you need help threading your new home sewing machine? In this article we will show you exactly what to do.


Buying your new home sewing machine can be an exciting experience. It may be daunting and frightening to learn how to operate a new sewing machine, whether you are a novice or have a higher level of sewing knowledge.

Threading the sewing machine is the first thing you must learn and should not be taken lightly. If you struggle to thread your new home sewing machine, you may encounter specific stitching issues that need attention, resulting in wrinkled cloth or missed stitches.

Don’t fret though. In this guide, we will show you everything you need to know about threading your new home sewing machine.



Step-by-step Guide on how to Thread a New Home Sewing Machine


Step 1: Take the Spool Thread and Place it on a Spool Pin

To begin, you need a spool thread and an empty bobbin. Take the spool thread and place it on a spool pin. Wrap the thread firmly six times around the bobbin. Slide the bobbin-winding pin all the way to the right until it snaps into place. Securely slide the thread from the spool end beneath the tension pin on the top left. Wind the bobbin by pressing the foot pedal. When the machine comes to a halt, cut the thread.


Step 2: Unwind the Thread

Thread your new home sewing machine by unwinding 12-inches of thread and firmly holding it near the thread spool. Then wrap the thread under the thread guide to the left side of the spool pin.


Step 3: Follow the Thread Guide

Drag the thread down and under the machine’s thread guide, back up and over the take-up lever, then back down. Pull the thread gently to eliminate any slack.

The take-up lever and thread guide link the thread to the top tension wheel, ensuring that the thread is correctly pulled as it goes through the machine. Let go of the thread in your right hand.


Step 4: Insert the Thread in the Needle Bar Thread Guide

Insert the thread into the needle assembly’s needle bar thread guide. The needle bar thread guide is a bar with a slot or a ring with a thread opening.

Thread the needle by needle threader. However, most older machines don’t have a needle threader; instead, you can thread them with a hand needle threader.


Step 5: Insert the Bobbin

Open the bobbin door, insert the bobbin into the case, and close the bobbin casing door.

Turn the handwheel on the right side of the machine forward to lower the threaded needle into the bobbin case. Continue rotating the wheel until the needle reaches its highest point. It will bring up the thread tip out of the bobbin. Tug the tail up and out using your fingers.


Step 6: Slide the Threads Beneath the Presser Foot

Slide the upper and lower threads beneath the presser foot. Place the fabric below and lower the presser foot lever. Hold both threads and push the foot pedal. Release the threads after sewing six stitches.



Additional Tips to Test If You’ve Properly Threaded Your New Home Sewing Machine

  • To verify the stitching, sew a test strip on a scrap piece of cloth.
  • Turn the top tension dial to the left to change the tension—the greater the number, the less stress on the stitch.
  • Ensure that the needle size corresponds to the thread size.
  • Use a seam ripper or tiny scissors to help grasp and pull the thread up from the bobbin casing.




Popular New Home Sewing Machine

Throughout its lengthy history, New Home manufactured a wide range of sewing machines. A few stood out for their importance or popularity, ranging from basic hand-crank versions to more sophisticated treadle machines.

  • Number Four
  • Parlor Cabinet Treadle
  • New Hand-Crank Home Machines



Basic Guidelines of Cleaning Your New Home Sewing Machine

Have you ever given any thought to your new home sewing machine maintenance? Don’t be concerned! It is simple to maintain your sewing machine and will only take you a few minutes. However, don’t underestimate the need for sewing machine maintenance. Yes, it is straightforward and a quick process. A well-maintained machine will operate more smoothly, stitch better, and prevent minor issues from becoming major ones.

When you follow these basic guidelines in combination with your sewing machine handbook, you will be able to extend the life of your machine and finish any job that comes your way.

  • Clean all parts of your machine
  • If possible, use compressed air
  • Wipeout your sewing machine after use
  • Frequently change the needle
  • Lubricate your new home sewing machine
  • Cover your machine when not in use

When you’re having problems with your sewing machine, a decent rule of thumb is to “clean it first.” Many issues are caused by thread ends, lint, or dust accumulated on the machine’s functional components. Regular cleaning and maintenance will maintain your equipment in top shape.


how to thread a new home sewing machine banner




Proper threading of your new home sewing machine is essential for achieving stable and appealing stitches. By following these ultimate guidelines, you may improve the effectiveness and efficiency of your sewing process. So, get your new home sewing machine, practice threading it, and begin stitching.

Leave a Reply